Home Outdoor Sports FAQS Fishing Golf swimming Skiing and Skating Cycling Climbing Other Outdoor Sports Camping
Cycling Tips and Training  Outdoor sports > Cycling > Cycling Tips and Training > 5 Ways to Increase Your Power on the Bike

5 Ways to Increase Your Power on the Bike

2016/7/25 10:14:38

In a previous article, I introduced five simple ways to boost cycling power. These included riding in bigger gears, riding uphill, riding into headwinds, using block training and following the 75 percent rule.

Once you've got down the basics, take your cycling to the next level with these five more advanced ways to increase power on the bike.

More: 4 Tips for Using a Power Meter Wisely

Power Bursts

Power bursts are a great way to increase your leg strength and muscular endurance, which is the ability to pedal a relatively large gear at a moderate cadence (i.e., force generation). It's a versatile workout that you can complete on any terrain. Begin by warming up thoroughly. This should include easy spinning as well as a few pulls in bigger gears to prepare your legs.

The warm-up is critical because of the stress placed on the knees due to the use of relatively large gears. Begin each power burst by spinning at a very low cadence (i.e., coasting) and speed. Shift to your big gear (e.g., 53 x 12) and while seated, pedal as hard as you can until you reach 80 rpm. This should take about 15 seconds. Shift to a small gear and spin easy for three minutes at 90 rpm. Repeat 10 times and build up to 15 power bursts per session.

More: Going Uphill Fast With Power

Cadence Intervals

Another way to increase power is to elevate your pedal cadence. You can do this with cadence intervals, which is a moderate intensity workout that will improve your neuromuscular coordination (i.e., improved coordination and cooperation between the muscles that enhance your ability to pedal at a very high rate).

To do this workout, use a relatively small gear that allows you to train at 85 to 95 percent of your lactate threshold heart rate (75 to 90 percent of your functional threshold power) while pedaling a cadence of 100 to 110 rpm. Start with 3 x 8 minutes and increase the length of the hard efforts until you can complete 3 x 15 minutes with five minutes of recovery.

More: Power Up With Tempo Intervals

Ride Long Distances

Long rides improve your aerobic and muscular endurance. More than that, they stress your cardiovascular and muscular systems in a way that facilitates the physiological adaptation process. Long rides are the most effective way to increase training volume and stress; however, keep two points in mind.

First, long is a relative term. If your longest ride to date is two hours, completing a three hour ride will have a significant impact. Likewise, if you routinely complete four hour rides, keep working until you can finish a five- or six- hour jaunt. Second, you don't have to complete a long ride every week. A long day in the saddle every three or four weeks will have a significant impact on your power output and overall fitness.

More: How Much Fuel Do You Need During Long Rides

Modify Your Cadence and Gearing Patterns

Physiological adaptation occurs when the body encounters stresses it has not had to deal with previously. If you do the same workouts again and again, your body gets used to them no matter how hard they are, which can lead to a performance plateau.

One way to build diversity into your regimen is to alter your cadence and gearing patterns. For example, if you typically perform lactate threshold intervals in a relatively small gear at 95 to 100 rpm, you can better facilitate the adaptation process by doing some of those intervals in a bigger gear at 80 to 85 rpm. Likewise, if the cadence for your long ride is typically 90-95 rpm, spend some time pedaling a bigger gear at 80-85 rpm.

More: Cycling Cadence 101

Push Through a Personal Barrier

In other words, do something you have never done before. For example, if your current long ride is three hours, build up to four hours. If you normally do one long ride during a mesocycle (e.g., four weeks), try two long rides. If you typically climb your favorite hill three times, climb it four times. If your personal best up that hill is 12 minutes, set a seasonal goal to break 12 minutes. If your longest lactate threshold interval is 15 minutes, increase it to 20 minutes. If you currently ride four days a week, try riding five days a week. If you typically perform two-day high-intensity training blocks, try a three-day block. If you are a multisport athlete who normally performs one brick in a microcycle (e.g., one week), perform two bricks in your next microcycle.

Anything you do that you have never done before will help facilitate the physiological adaptation process. But be careful, this can be a recipe for overtraining if you do not allow for sufficient recovery.

More: Characteristics of Good, Challenging Goals

  1. Prev:
  2. Next:
Related Articles
4 Ways Duct Tape Can Save Your Ride
How Cyclists Can Improve Their Bone Health
Should Women Cyclists Train With Men?
The 4 Common Bike Indoor Trainers
How Does a Bike Box Work?
5 Things You Need to Know About Post-Ride Calories
Vitamin D Deficiencies in Cyclists
6 Tips for Riding at Night
How You Can Use a Heart Rate Monitor to Get Faster
More Great Links

Purchase Wholesale replica sunglasses in cheap rates

People who spend most of their time outdoors prefer polarized sunglasses,which cut extra

Are Most Athletes Overhydrating?

Hydration is a huge topic these days. The catch phrase Hydrate or Die is the war cry of a lot o

Extend Your Summer Cycling Fitness

The physical and mental challenges of late-season events can be significant. Season fatigue, burnout

Contact management E-mail : [email protected]

Copyright © 2005-2016 Outdoor sports All Rights Reserved