Qualcast Spreader Settings for Lawn Sand: A Comprehensive Guide

1. Mow your lawn to the correct height. The ideal height for most cool-season grasses is 2.5 to 3 inches. For warm-season grasses, the ideal height is 3 to 3.5 inches.

2. Remove any dead leaves, grass clippings, and debris from your lawn.

3. Water your lawn thoroughly.

Step 2: Choose the correct setting on your Qualcast Spreader

The Qualcast Spreader has four different settings: 1, 2, 3, and 4. The number corresponds to the amount of lawn sand that will be applied per square meter. For lawn sand, you should use setting 3.

Step 3: Apply the lawn sand

1. Start by spreading the lawn sand in a thin, even layer.

2. Walk in straight lines, overlapping each pass by about half.

3. Avoid applying too much lawn sand, as this can damage your lawn.

Step 4: Water your lawn

Water your lawn thoroughly to help the lawn sand settle into the soil.

Step 5: Enjoy your lawn

Your lawn will now be free of weeds and other pests for up to six months.