Home Outdoor Sports FAQS Fishing Golf swimming Skiing and Skating Cycling Climbing Other Outdoor Sports Camping

3 Drills to Improve Cycling Efficiency and Pedal Cadence

If you were ever a fan of Lance Armstrong, then you've probably heard a million times that it was his pedal cadence that could be attributed to his gigantic change and improvements as a cyclist. Before 1999, Lance was a masher, hammering and fighting his bike on the way to many solo stage victories and a few of the classics.

Lance himself attributed Miguel Indurain for the switch to a higher pedal cadence before his first Tour de France victory, saying way back when in 1999 that higher cadences were more efficient and allowed for the body to recover at a much quicker rate. While we know now that pedal cadence wasn't the only thing Lance was using to recover, there is some validity to Miguel "Big Mig" Indurain's advice to young Lance. To become a more efficient cyclist, you need to become a more efficient at pedaling.

More: Smooth Your Pedal Stroke with a Fixed Gear

This isn't to say that every cyclist needs to pedal at 110 rpms (revolutions per minute) the way Lance did. Chrissie Wellington has proven through her relatively low cadence (between 60 and 70 rpms) that there isn't a magic number that you have to hit in order to become a more efficient and powerful cyclist.

However, just because some cyclists prefer high cadences and others opt for lower, slower pedaling rates, it is important to practice riding at a higher cadence regardless of what you find to be the most comfortable as a cyclist. Practicing pedaling in higher cadences will make your pedal stroke more efficient and help to work out any dead spots where power isn't being produced.

More: Thoughts on Pedal Cadence from Observing the Tour

How to Count Pedal Cadence

A lot of bicycle computers have sensors that go near the crank that count pedal cadence for you. If you don't have one, you can measure your cadence by counting how many times one knee rises during a 30-second interval. Double this number, and you have your revolutions per minute. It isn't as accurate as a computer, but you can make it work.

More: The Risks of Low Cadences in Indoor Cycling Classes

Below are three cadence drills that will improve your pedaling efficiency on the bike.

Drill #1: Spin-Ups

Find a moderate sized climb with a gradual descent. Once you're at the top, shift into a gear that puts you around 70 rpms. On the way down, don't shift gears, gradually letting your cadence rise until you get to the bottom. Shoot to be well above 100 rpms by the time you reach the bottom. Repeat 4 to 5 times.

Tip: When you get more comfortable with this drill, start at a higher cadence at the top of the descent. As with the other drills, make sure you are applying even pressure for the full rotation of the pedal stroke, avoiding dead spots where power isn't being produced.

More: Cycling Cadence 101

Drill #2: Single Leg Pedaling on Trainer

If you have an indoor cycling trainer, this is a great drill to improve pedaling efficiency. With one foot clipped into your pedal and the other leg free (either resting on the frame of your trainer or on a box next to the bike), shift to an easy gear and pedal for 20 to 30 seconds (or until fatigue). Repeat with the opposite leg. Start with five repetitions with each leg, increasing the duration of the drill as it becomes easier.

Tip: This drill will feel awkward at first, in part because you will likely have many spots along the course of one revolution where power isn't being produced. These are called dead spots, and are precisely the reason why this drill helps you to pedal in smooth circles. If you're having a hard time with this drill at first, clip both feet into the pedals. Do the drill the same, trying not to use one leg (even though its clipped in) and letting the other leg do all the work. Switch legs every five pedal strokes for about five minutes. This is also a good way to practice if you don't have an indoor trainer or for when you're riding on the road.

More: Stroke of Genuis: Refine Your Pedaling

Drill #3: Cadence Intervals

From your normal cadence and shift to an easier gear 2 to 3 above what you would normally ride at. Ride for five minutes at this new cadence (which should be between 90 and 120 rpms) and return to your normal cadence. Try this several times during your ride during long flat sections.

Tip: If you're using a speedometer or power meter, try to maintain your speed or power when you shift to the higher cadence. This is a good way to improve your cardio and give your muscles and joints a break from the big gears. Remember to try and keep a smooth pedaling rhythm even as you start to fatigue. If your hips start to bounce because your pedaling more quickly than you can keep up with, go to a slightly harder gear that you can more easily maintain.

Whether your looking to improve your efficiency for a cycling on the road or the dirt, these drills will help you become a better, more efficient cyclist no matter what your preferred cadence is.

More: A Breakdown of the Cycling Pedal Stroke

Active logoReady to ride? Search for a cycling event

Outdoor Sports
Training horses
American Legion
intentional walk rules
Tips To Assist You Choose The Right Type Of Flashlight
Cozumel Scuba diving comes with loads of adrenaline rush
Audi Exterior
Go Scuba Diving at Yap Dive Sites
Coach Gun Value
full back and tight end
Cycling Tips and Training

Crossbow Reviews based on technology

The Crossbow weapon dates back to ancient China and can be traced back to more than 2,000 year

Volleyball- Amusing Game Play on the Beach

Newport Beach is best recognized for its 6 miles of pristine beach and walkway. Many persons l

The Importance of Soccer Videos to get the Latest Football News

Soccer is the most popular sports in the todays world. Soccer has been mesmerizing the worldwi

Copyright © www.mycheapnfljerseys.com Outdoor sports All Rights Reserved