Home Outdoor Sports FAQS Fishing Golf swimming Skiing and Skating Cycling Climbing Other Outdoor Sports Camping

How to Construct a Simple Wire Forming Tool for Shaping Inline Spinner Shafts


Nail and screw

Building fishing lures is a fascinating hobby that is both money saving and very easily accomplished.  The purpose of this article is for me to show you how to build a tool that will be used for making a loop on one end of a wire shaft .  This configuration then is a key element used in constructing homemade inline spinners.  Materials are easily attainable and very inexpensive.

 Here is a list of materials used in the construction of this device:

                                    1.  4" Piece of Dowel Rod

                                    2.  A Finishing Nail

                                    3.  One Small Wood Screw

 

Tools needed in the making of this project:

                                    1.  Hammer

                                    2.  Screwdriver

                                    3.  Hand Saw

                                    4.  Hacksaw

 

You will begin by cutting a 4" piece from the dowel rod (an old broom handle can be used in place of this).  

DowelEnd view

Next you will drive a finishing nail 1/2 way into the middle of one end in the piece of wood you have just cut.  Now insert the wood screw 1/4" away from the nail allowing 1/2 of the screw to be protruding from the end of the dowel  The hacksaw will now be utilized to cut off the head of your nail.  This is done in order for the wire loop (which this tool is being constructed to help make) to slip off the nail very easily.  The building of the wire forming tool is now complete.

 

Wire Bending 1

Next I will teach you how to use this new implement.  The wire used is a simple paper clip that has been straightened.  Place one end of the wire between the screw and nail in such a manner that it protrudes about an inch from center of the dowel.  

Wire Forming 2

Now take the long end of your wire and bend it around the nail.  This will begin to form a loop at the wire's end.  

Wire forming 3wire forming tool 5

After the loops size meets your criteria, remove this form from the nail.  Use a pair of needle nosed pliers and your fingers to twist the short end of wire over the long end.  Do this at least 2X and clip off the tag end with a pair of wire cutters.  This concludes the directions referring how to use your newly made wire forming tool.

In the next article I will show you how to take this newly acquired skill and add a few more steps so that you can make an inline spinner.  Thank you for reading this article.


Outdoor Sports
Top Bass Fishing Guide Ness
Book Review: The Lonely Tadpole
rule about having to slide at home if a play is being made
EC Powell Bamboo Fly Rod
6 Ways To Introduce Cycling Into Your Life
heddon bamboo fly fishing rod
Safty Guidelines on the Golf Course
Plan Your Camping Gear Ahead For A Safe Trip
Golf Travel Cases Make Golfing Travel A Joy
Fishing Articles

5 Tips for Racing a Time Trial

In Part II, we touched on better bike position, specific equipment to improve speed and tricks

Find out the 6 Tips that Beginners can Follow to Enhance their Game of Basketball in Ohio

In order to play basketball in Ohio, one needs to possess certain key skills. Undoubtedly, it

Walleye Fishing Tips and Tricks

This article is a compendium of some effective tips that will help you fish for walleyes and increas

Copyright © www.mycheapnfljerseys.com Outdoor sports All Rights Reserved