ASA All Star Tournament DP/Flex Rule

Question
My daughter is playing 10U; and their 1st tournament has a rule stating each team play with 9 players, or 10 with a DP/Flex player. Does that mean that the same players are on the field defensively the entire game? And those not named DP or Flex on the roster sit out the entire game?

Answer
Hi Venus,

Well lets go over the rules for DP/Flex

In FP you can choose to have a "DP" designated player and a FLEX player

You can only bat 9 players but play with 10

I'll give you first the basics of the DP/Flex

This rule is not complicated but people like to make it so.  Just read each section, understand it, and move to the next section.

Ok.....if you're going to use a DP and a FLEX you must make it known prior to starting the game...you CANNOT do it once the game begins

The DP can be any batting position 1-9 (for examples later this DP is going to be #1 batting 3rd) the DP bats (plays offense) for the FLEX player.

The FLEX who plays only defense MUST be listed 10th (for examples later this will be player #2) the flex does not bat in this position, we only bat 9.

The DP and any sub for the DP must stay in the original batting position (in this case B3)  If you put in #4 for #1, #4 is now the DP

The FLEX any any sub for the flex stay in the 10th position.  If you put #5 in to play defense for #2, #5 is now the FLEX.

The FLEX may bat but ONLY in the DP's position (in this case B3)or may run ONLY for the DP. This is a substitution for #1 and takes the game from 10 down to 9 players and #1 is considered to have left the game, they may re-enter once, but only at B3.

The DP may play defense for the FLEX. This also is a substitution and takes the game from 10 down to 9 players and #2 is considered to have left the game.  They may of course re-enter once.

The DP and the FLEX can never be on offense at the same time.  This makes sense because the DP is batting for the FLEX, the FLEX may only bat in the DP's position (in this case B3)and the DP may only bat at B3

Those are the basics...here's some more complicated stuff....

If the DP (#1) is playing defense for the FLEX (#2)(your playing w/ 9) and you wish to re-enter the FLEX, the DP can leave the game and #2 bats at B3, still playing w/9.

OR the DP may continue to bat at B3 and play offense only (now you're playing w/10 and #2 goes back to 10 and does not bat.

OR the DP may continue to bat at B3 and play defense for ANOTHER PLAYER(as explained below). It is in all the above cases this a re-entry for the FLEX #2 and should they leave the game again, #2 would be out of the game.

The DP may also play defense for any other player at any position. (Let's use #3,B8) #3 is not considered to have left the game and this is not considered a substitution. #3 continues to bat in the 8th position but not play defense.

In this case both the FLEX and the DP are playing defense at the same time and this is legal.  The DP continues to bat at B3, the FLEX is not batting.

You can go back and forth between 10 and 9 players the entire game.For example after 2 innings you have #2 bat for #1 at B3.  You now are playing with 9 and you play that way for 2 innings.  In the 5th you re-enter #1 to bat at B3 and #2 moves back to 10th, you are now playing 10 again.  This is not considered a substitution for #2 since they are the flex player returning to their position.

As mentioned earlier you can legally sub for either the DP and/or the Flex.  And you can certainly sub for any other player in the batting order.

Let me know if you have any specific questions on this.


Mark