Doughboy Pool Support Leaning? Safety & Repair Guide

Potential collapsing danger: Leaning pool supports can strain the integrity of the entire structure, so it's crucial to address the issue as soon as possible to prevent potential collapse and hazards to anyone using the pool.

Fixing a leaning Doughboy above ground pool:

1. Drain the pool: Ensure the water level is low enough to relieve the weight on the leaning side.

2. Inspect the posts: Thoroughly inspect the posts to identify the source of the leaning (loose screws, broken brackets, damaged post, etc.)

3. Tighten Screws and Brackets: If the screws holding the posts in place have become loose, tighten them. Replace any rusted or damaged screws or brackets.

4. Check post placement: Ensure the posts are properly seated and resting evenly on the ground or support beams.

5. Use shims: If the ground or support beams are uneven, use shims (wedges made of wood or plastic) to level the pool structure and support the leaning post.

6. Replace damaged posts: If the post itself is damaged or broken, replace it with a new, sturdy support post.

7. Stabilize the frame: Use a leveler or plumb bob to ensure that the pool frame is level all around. Adjust as needed.

8. Add bracing: Consider adding additional support or bracing to the leaning post to prevent further movement.

9. Refill the pool gradually: Slowly refill the pool to minimize stress on the repaired area. Monitor for any signs of leaning or shifting as the water level rises.

10. Regular Maintenance: To prevent future issues, regularly inspect and maintain the pool frame, including posts and brackets. Tighten screws and replace any damaged components promptly.

11. Expert Assistance: If the leaning is significant, the repair is complex, or you feel uncertain, consult a professional pool installer to assess the situation and recommend the safest and most effective solution.