Effective Rust Stain Removal for Pebble Sheen Pools: A Step-by-Step Guide

* CLR Calcium, Lime & Rust Remover

* Soft bristle brush

* Bucket of warm water

* Non-abrasive sponge or cloth

Instructions:

1. Scrub the rust stain with a soft bristle brush. This will help to loosen the rust and make it easier to remove.

2. Apply CLR Calcium, Lime & Rust Remover to the rust stain. Let it sit for 5-10 minutes, or according to the product directions.

3. Scrub the rust stain again with a soft bristle brush.

4. Rinse the area with a bucket of warm water.

5. Repeat steps 2-4 if necessary.

6. Once the rust stain is removed, wipe the area with a non-abrasive sponge or cloth to remove any remaining CLR.

7. Rinse the area with water.

Tips:

* If you have a large area of rust stains, you may want to use a power washer to speed up the process.

* Be careful not to use harsh chemicals or abrasive cleaning materials, as these can damage your pool finish.

* If the rust stains are still visible after following these steps, you may need to contact a professional pool cleaner.