Splash Club Pool Setup: Instructions & PermaFilter Guide

You can find instructions detailing the process of setting up a 12ft x 36in Splash Club above-ground pool with a PermaFilter system on the manufacturer's website or in the user manual that came with your pool. The steps provided here may vary slightly based on the specific model and version of the pool you have, so it is always best to refer to the official documentation provided by the manufacturer for the most accurate and up-to-date instructions. Here's a general outline of the steps:

1. Choose a Level Location:

- Select a level area for your pool installation, ensuring it is free of rocks, roots, or any sharp objects.

2. Lay Out the Pool Liner:

- Spread the pool liner on the chosen location, making sure the pool walls are centered and the drain hole is properly positioned.

3. Assemble the Pool Walls:

- Install the bottom rails of the pool walls, connecting them at the corners using the provided clips.

- Insert the wall panels into the bottom rails, locking them in place securely.

4. Attach the Top Rails:

- Connect the top rails to the assembled pool walls, using the included clips.

- Secure the top rails in place by tightening the screws provided.

5. Install the Uprights:

- Insert the vertical support posts (uprights) into the holes provided on the pool walls, making sure they are positioned firmly.

- Secure the uprights by installing the nuts and bolts provided for each post.

6. Attach the Top Cap:

- Place the top cap around the perimeter of the pool, ensuring it fits snugly over the top rails.

- Use the provided screws to attach the top cap securely.

7. Connect the PermaFilter System:

- Follow the instructions provided with the PermaFilter system to connect it to the pool's filtration system according to the manufacturer's guidelines.

8. Fill the Pool with Water:

- Start filling the pool with water, ensuring it does not exceed the recommended fill line marked on the pool wall.

- Run the filter system to circulate the water and remove any debris.

9. Level the Pool:

- Check the pool's levelness by placing a level tool on the pool wall.

- If needed, adjust the uprights by loosening or tightening the bolts to level the pool.

10. Enjoy Your Pool:

- Once the pool is properly leveled and filled with water, you can enjoy your Splash Club above-ground pool with the PermaFilter system.

Remember to refer to the specific instructions provided by the manufacturer for your particular Splash Club pool model to ensure a safe and successful setup process.