Home Outdoor Sports FAQS Fishing Golf swimming Skiing and Skating Cycling Climbing Other Outdoor Sports Camping

What Is The Best Way To Sharpen Bowie Knives?

Sharpening Bowie knives need not be a frustrating procedure. In fact, while these are certainly larger than many other types of knives, you'll find that you sharpen the blades in much the same way. How should you go about doing this? What should you do or not do in order to ensure that you are able to achieve a clean, sharp, straight edge on that knife? Here, you'll learn a bit more about the knife sharpening process, as well as what not to do when sharpening Bowie knives (or any other knife for that matter).

Generally, novice knife owners opt for the all-in-one type of system, as this allows them to control the angle of the blade, without having to do so by hand. However, those more familiar with the sharpening process often choose to use a series of whetstones or a whetstone and a strop. This results in a much better edge, though it takes considerable practice before you can call yourself an expert. As a note, if you choose to go it alone, practice with some inexpensive blades before you attempt to sharpen your Bowie knife, or any other knife that might represent a considerable investment.

Next, you will need to find an angle guide, if your knife sharpening kit does not include one. If you are unable to do this, you will need to know how to control the angle of the blade on your own. This will require a firm hand and a good eye. If the angle of the knife blade changes during sharpening, the edge will not be suitable for much. You should also have a high quality whetstone for the sharpening process, as well as the proper lubricant (some stones come with oil, or you can purchase the oil at your local sporting goods store). Never sharpen a knife if the whetstone has not been lubricated.

Once you have your sharpening system purchased, you will need to know how to sharpen that bade. Bowie knives are quite large, so the best way to sharpen your blade is actually to grind it in circles, down the length of the blade (heel to toe). Make sure that you are able to hold the blade at the correct angle while doing this, or your knife will not take a good edge. The angle is quite important; the entire reason for purchasing an all-in-one sharpening system is so that you don't have to guess at the angle of the blade to the whetstone.

Once you have a solid burr along the blade, you'll need to switch to a finer stone. You can even use a strop here. The purpose of the second grinding is just to remove the burr and polish the edges of the blade a bit. This will ensure a clean cut each time (as the burr will catch during the cutting process, leaving ragged cuts). When removing the burr, it's best to go heel to tip on the knife.

Outdoor Sports
How to Make a Kids Camp in Your Home
Scuba Diving Grand Cayman - Big Tunnels
Rio Fly Line Is The Unsurpassed Brand For Fly Fishing Thanks To Its Versatility
WWII Handgun
SEE HORSE
value of pole
Venturing on Gorilla Trekking Tours in Africa
rifle choice
Saltwater Fishing Rods
Fishing Articles

Bass Brains

How premier kayak bass angler Drew Gregory, Chad Hoover and Jeff Little crack the

Mitchell 300 DL Reel, Serial # D162106

Question mitchell 300 dl I have been trying to find out the value my Mitchell 300 DL reel dated

New Trout Fishing Boat: Raft or Drift?

Many of you know that my partner Tim Romano is a rowing fool. He has a handful of boats, from infla

Copyright © www.mycheapnfljerseys.com Outdoor sports All Rights Reserved