How to Securely Concrete a Tetherball Pole: A Step-by-Step Guide

Materials Needed:

- Tetherball pole

- Quick-drying concrete mix

- Gravel or crushed rock

- Shovel

- Water

- Level

- Measuring tape

- Safety goggles

- Gloves

Instructions:

1. Choose the Location:

- Select a suitable location for the tetherball pole, ideally on a level surface with good drainage.

- Ensure that the area is clear of any underground utilities or obstacles.

2. Dig the Hole:

- Dig a hole approximately 2 feet deep and 8 inches wide.

- The hole should be deep enough to allow for at least 1 foot of concrete beneath the pole.

3. Set the Pole:

- Place the tetherball pole in the center of the hole, ensuring it stands upright and level.

- Use a level to check the vertical alignment of the pole.

4. Add Gravel or Crushed Rock:

- Pour a layer of gravel or crushed rock about 6 inches deep into the bottom of the hole.

- This will provide drainage and help stabilize the pole.

5. Mix the Concrete:

- Prepare the quick-drying concrete mix according to the manufacturer's instructions.

6. Pour the Concrete:

- Carefully pour the concrete mix into the hole, ensuring that it surrounds the pole and fills the gaps between the pole and the gravel.

- Use a shovel to spread and level the concrete.

7. Level the Concrete:

- Check the level of the concrete and adjust the pole as needed to ensure it remains vertical.

8. Allow the Concrete to Set:

- Let the concrete set and cure completely, as per the recommended curing time specified by the concrete mix manufacturer.

9. Backfill the Hole:

- Once the concrete has set, backfill the remaining space around the pole with soil or sod to create a smooth and level surface.

By following these steps, you can securely concrete a tetherball pole into the ground, providing a stable and enjoyable playing experience. Remember to wear appropriate safety gear and work cautiously when handling concrete.