Metal Out for Pools: Removing Metal Stains & Rust - A Step-by-Step Guide

Metal Out for Pools is used to remove metal stains and rust from pool surfaces. It is formulated to dissolve and chelate metals, allowing them to be easier to rinse away.

Here's how to use Metal Out for Pools:

1. Test your pool water to determine metal content. This will help you determine the amount of Metal Out to add.

2. Add the recommended amount of Metal Out to your pool water. The specific dosage will depend on the product instructions and the metal content of your water.

3. Run your pool pump for at least 24 hours to allow the Metal Out to circulate throughout the pool.

4. Brush the pool surfaces to help loosen and remove any metal stains or rust.

5. Vacuum the pool to remove any debris that has been loosened by the Metal Out.

6. Test the pool water again to ensure that the metal levels have been reduced.

7. Repeat the process if necessary.

It's important to follow the instructions on the product label carefully and take safety precautions, such as wearing gloves and eye protection, when using Metal Out for Pools.

Please note that Metal Out for Pools may affect the pH and alkalinity levels of your pool water, so it is recommended to test and adjust these levels as necessary.