Remove Sunscreen and Scum from Vinyl Pool Liners: A Step-by-Step Guide

To remove baked-on suntan lotion and scum from a vinyl liner swimming pool, follow these steps:

1. Prepare the Pool:

a) Turn off the pool's pump and filter system.

b) Adjust the water level below the affected areas to expose them.

2. Scrape Off Large Debris:

Use a pool brush with stiff bristles to scrape off any large debris or suntan lotion build-up from the vinyl liner.

3.Apply Cleaning Solution:

a) Mix a solution of pool-specific vinyl liner cleaner and water according to the product's instructions.

b) Apply the solution directly to the affected areas using a soft sponge or cloth.

4. Scrub the Surface:

Gently scrub the affected areas using a soft bristled brush or sponge. Work in small sections to ensure thorough coverage.

5.Rinse Thoroughly:

Rinse the entire pool surface, including the treated areas, with clean water to remove any residue. Reconnect the pool pump and filter system to circulate the water.

6.Circulate the Water:

Run the pool's pump for at least 24 hours to circulate the cleaned water and ensure proper chemical balance.

7. Shock Treatment:

After the 24-hour circulation, perform a shock treatment to the pool water according to the product's instructions. This will help oxidize any remaining suntan lotion residue.

8. Regular Maintenance:

To prevent future build-up, follow a regular pool maintenance routine that includes:

- Adding proper pool chemicals to maintain proper water chemistry.

- Regular brushing of the pool surfaces.

- Occasional use of a pool skimmer to remove surface debris.

By following these steps, you can effectively remove baked-on suntan lotion and scum from your vinyl liner swimming pool, ensuring a clean and enjoyable swimming experience.