Well Water Treatment for 7000 Gallon Pools: A Comprehensive Guide

- 1. Test Well Water:

a) Test well water for alkalinity, pH, calcium hardness, and chlorine.

b) Results will determine treatment requirements.

- 2. Adjust Alkalinity:

a) Ideal range: 80-120 ppm.

b) Raise low alkalinity with baking soda or soda ash.

c) Lower high alkalinity with muriatic acid.

- 3. Balance pH Level:

a) Ideal pH range: 7.2-7.8.

b) Raise low pH with soda ash or pH increaser.

c) Lower high pH with muriatic acid.

- 4. Adjust Calcium Hardness:

a) Ideal range: 150-400 ppm.

b) Increase calcium with calcium chloride.

c) Lower calcium with chemical softener.

- 5. Sanitization with Chlorine:

a) Use chlorine to kill harmful bacteria.

b) Maintain chlorine concentration between 1 and 3 ppm.

- 6. Use Filter and Pumps:

a) Ensure filter and pumps are working efficiently.

b) Rinse filter when pressure gauge reads 10 psi above normal.

- 7. Additional Treatments:

a) Use algaecides to prevent algae growth.

b) Use clarifiers to improve water clarity.

c) Use scale inhibitors to prevent calcium buildup.

- 8. Regular Monitoring:

a) Test well water regularly, adjust chemical balance as needed.

b) Maintain proper chlorination and monitor for any changes in water quality.