DIY Unicycle: Building One From a Bike Frame - Complete Guide

- A bike frame

- A front wheel

- A saddle

- A seat post

- A crankset

- A chain

- A rear wheel

- A unicycle fork

- A headset

- A set of handlebars

- A set of brake levers

- A set of brake calipers

- A set of spoke wrenches

- A grease gun

- A torque wrench

- Safety goggles

Instructions:

1. Remove the front fork, rear wheel, and handlebars from the bike frame.

2. Cut the down tube of the bike frame to the desired length for the unicycle.

3. Attach the unicycle fork to the bike frame.

4. Install the headset into the unicycle fork.

5. Install the handlebars onto the headset.

6. Install the brake levers onto the handlebars.

7. Install the brake calipers on the wheel rims.

8. Lace the rear wheel onto the hub and spokes.

9. Install the tire on the rear wheel.

10. Install the rear wheel onto the bike frame.

11. Install the crankset onto the bottom bracket.

12. Install the chain around the crankset and rear wheel.

13. Install the saddle onto the seat post.

14. Install the seat post into the bike frame.

15. Grease all of the moving parts of the unicycle.

16. Tighten all of the nuts and bolts to the correct torque specifications.

17. Put on your safety goggles and take the unicycle for a test ride.

Enjoy riding your new unicycle!